Failed Furnace Fan Controller

Making things out of Metal, Plastic or Even PCBs
Post Reply
Posts: 90
Joined: Fri Dec 24, 2010 1:57 pm

Failed Furnace Fan Controller

Post by foxmiles » Sat Jan 12, 2013 2:35 am

I've spent all the time and resources I'm willing to on this project for now. I may complete it at a later date.
It all works except the input voltage from the furnace transformer is too high after rectification (38-40v). The 78M05 I'm using is 35v max and it doesn't tolerate any more. It doesn't seem to damage it, as even after testing as bad on the furnace it works fine on 18v (max on my lab PS) I tried to build a smps replacement based on Roman Black's design, that also worked fine on 18v and blew at least a zener diode on the furnace. I used parts I had on hand, so sometime I will get precise values and try again. For now I'm ordering a snap-disk. Perhaps some of this design may be useful to someone for other purposes. It really sucks, as the controller works fine, I just can't get the voltage regulated to 5v. If you have any ideas feel free to comment.

Complete Writeup ... rnace.html
KiCad Files and Arduino Code
(13.41 KiB) Downloaded 381 times
Furnace Fan Controller top pcb
Furnace Fan Controller bottom PCB
Furnace Fan Controller Assembled
Digging with a spoon will accomplish more than leaning on a shovel.

Site Admin
Posts: 190
Joined: Sat Dec 11, 2010 12:34 am

Re: Failed Furnace Fan Controller

Post by Jarod » Sat Jan 12, 2013 9:46 pm

How about something like a lm2576-hv?

Post Reply