DD-WRT: Choosing the right kong build for your router.

All things software, Operating systems, virtualization, gaming, etc.
Post Reply
Jarod
Site Admin
Posts: 189
Joined: Sat Dec 11, 2010 12:34 am
Contact:

DD-WRT: Choosing the right kong build for your router.

Post by Jarod » Sat Sep 28, 2013 3:31 pm

I've spoken about the kongmod ddwrt builds, they have support for optware, as well as a better qos implementation along with some other nice features.

however finding the right build can be slightly daunting.

head on over to http://www.desipro.de/ddwrt/ in a new tab so you can follow along.

not many devices are supported with Kernel 3.0, so you want the K26 directory

at this point there is a bunch of build numbers. you want the highest build number, which will have the most recent date. as of this posting, that is R22200, built on 18-Aug-2013 10:18.

so now there is several crypticly named builds there.

kingkong builds are only good on routers with 16+mb of flash. which you probably don't have.

The Belkin Share and Sharemax both have 8MB flash, so its down the the ones starting with usb-ftp-samba3.

so look at the filenames there (you may have to mouseover to see them)

the nv60 and nv64 builds require 60 and 64kb of nvram. which you probably also don't have.

the Belkin share and sharemax have 32K of nvram. so you want one of the nv32 builds.
  • usb-ftp-samba3-dlna-nv32k-broadcom.bin
  • usb-ftp-samba3-vpn-nv32k-broadcom.bin
are your options for either of the belkin routers you've seen me use. (Share f7d7302 and Sharemax f7d7301)

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests